Rockin' The Degobah Swamp !

 Having recently completed a build of the LEGO Ideas Stratocaster guitar set, I proudly set it up in my LEGO display cabinet.  

It happened to fit right next to the Star Wars Yoda model.  I immediately noticed that the scale between the two sets  was perfect.

Hmmmm....Why not....

Pulling both models out of the cabinet, I set to work. It was an easy task to remove Yoda's light sabre from his claw-like grasp and situate the guitar's strap around his neck.  Yoda's left hand was a bit more problematic as it was attached close to his right.  I found a work around by detaching the hand altogether and wrapping the fingers around the Strat guitar neck.  The severed hand and arm stump do not readily show as such when viewed from the front! 

So, here we are - an iconic Star Wars character playing a legendary electric guitar.

Just imagine what sort of riffing and shredding could come from a Jedi Grand Master!

I also noticed something funny - Yoda only has two fingers to use for fretting the instrument. 

This immediately reminded me of the 20th Century jazz guitarist, Django Reinhardt.  This famous musician developed a unique two-finger guitar fretting technique after losing two of his digits in a fire at the age of 18!

So now I have Yoda, his red Strat, and Fender amp all displayed as one unit.

" Find a steady gig in Mos Eisley, will I !!"

A New Strat In The Guitar Collection

 Being a musician who owns and plays a couple of Fender Stratocaster guitars, I was delighted to receive this LEGO set as a Christmas gift:

This is LEGO Ideas set #21329

This set features a model of the iconic electric guitar model along with a Fender Princeton Reverb amplifier. Also included is a guitar stand and a stomp pedal.

1074 pieces, spread out over twelve bags, comprises the set. The guitar itself can be built in either a red or black version.

For this build, I chose red.

The first part of the build produces a functional guitar stand on which to place the completed instrument.

Next is the guitar neck, pickup section, and headstock. I was delighted to find the pre-printed tiles that represent the fretboard.  Also included is a tan slope with the pre-printed Fender logo.

Next up - installation of the strings.  These are made up of LEGO strings with attachment plates on each end. The set employs a clever technique of plugging the strings on to the back of the instrument, running them over a gear rack to the top of the guitar, then attaching them to their respective spots on the headstock. The attachment pins can be rotated to make the strings taut. Almost like the real thing.

From here, the build progresses into finishing off the guitar body, pick guards, knobs, tremolo bar, cable jack, and headstock tuners. The backside of the guitar gets a cover panel and a plate bearing a fender logo sticker. An added feature is the pre-printed Fender guitar strap.

The next bags to be opened were filled with the parts to build the Princeton amp.

This thing is highly detailed! From a loaded circuit board and tubes to the speaker and wiring.  There is even a representation of a reverb spring hidden deep in the cabinet. The outside of the amp is adorned with a proper grill and Fender logo tile, the control panel, and a carrying handle.  

The set is finished off with a stomp box with cable, and an instrument cable that connects guitar to amp.

As an even further added bonus, the set includes a large sticker with a LEGO/Fender logo suitable for putting on your full-size Strat guitar case!  How cool is that?

All in all, this is a very satisfying set - appealing to both the guitar musician and the LEGO fan.

It is quite evident that the set designers knew their way around the real thing....

Darth Vader Helmet Build (75304)

 I've  been a bit of a slacker as of late when it comes to doing anything LEGO. 

This set has been sitting around on my desk since Father's Day, but I just had too much on my plate to get around to building it.

This past week, I finally ripped into it, completing one parts bag each consecutive evening.

This, of course, is part of the Star Wars helmet series: The 'big guy' himself -Darth Vader!

Bag 1:

This selection of parts completes the display base, the internal support structure, and the lower part of the helmet.

As with the other sets in the series, the support base features a pair of Technic beams to provide great strength to the pedestal. Without them the structure would be too weak to bear the subsequent weight of the final build, as well as its ability to handle the stresses of attaching other sub-assemblies.

Bag 2

The parts in this bag begins defining the lower sides of the helmet.

Bag 3

And, now, the grim visage of our favorite Dark Lord.  The grills on the 'nostril' section are done with stickers.  In addition, the remainder of the internal support structure is completed here.

Bag 4

The top and back of the helmet are built up here.

Bag 5

Finally, the sides and flared lower sections are built and installed.  The final step attaches the name plate.

All in all, a very enjoyable and accurate build that may just be the crown jewel of the Star Wars helmet series.

"Do not underestimate the power of the Dark Side!"

The 2015 Americana Display, Part 13 - The United States Capitol Building

 Well, boys and girls, this is the final post of this series. I believe that this is the best build of the entire display.  The immense size and magnitude of detail is truly awe-inspiring....

The 2015 Americana Display, Part 12 - City Diorama

 This post features another Minifig-laden diorama encased in plexiglass.  This time it's a couple city blocks of high-rise buildings teeming with lots of raucous action.  Lots to see on every rooftop, street corner, nook, and cranny!

Phew!  LEGO Metropolitan Overload !!!

The 2015 Americana Display, Part 11 - The White House

 Yet another highly detailed LEGO representation of aWashington D.C. landmark - the Prez's house!